About TE Wire & Cable LLC
TE Wire & Cable LLC, a Marmon Wire & Cable/Berkshire Hathaway Company, is a premier Thermocouple and Specialty wire and cable manufacturer that was formed from the Wire and Cable Division of the Thermo Electric Corporation. The Operations for the manufacture of wire and cable have been in existence for more than 65 years, having been started to provide high quality wire to the thermo-sensing and temperature measurement markets in 1941. TE Wire & Cable LLC manufactures a full line of thermocouple wire and cable, from iron and nickel-based alloys, and copper instrument and control cable. TE Wire & Cable maintains an in-house laboratory directly certified by the National Institute of Standards and Technology (NIST), allowing it to calibrate its own wire which in turns provides a higher quality product with lower cost and improved efficiency. TE Wire & Cable is highly regarded as the industry leader and has developed a well founded reputation for providing high-quality temperature measurement wire & cable products with short lead times and competitive prices.
About Marmon Wire & Cable
TE Wire & Cable LLC is a member of the Marmon Wire & Cable group, a business sector within the Marmon Group of companies, which is a Berkshire Hathaway company. Marmon Wire & Cable comprises companies that manufacture and market electrical and electronic wire and cable. The Marmon Group is an international association of more than 125 companies that operate independently within diverse business sectors. Member companies have collective revenues of approximately $7 billion. www.marmon.com
ISO 9001:2008 Certificate
View Certificate
ISO 17025 Accreditation Certificate
View Certificate
Calibration Capabilities
Temperature is the most frequently measured process signal and the accuracy of the temperature measured is critical to the end product quality and cost. For this reason TE Wire & Cable LLC maintains the industry’s best equipped and most accurate temperature Calibration Laboratory. Our laboratory standards are directly calibrated by and traceable to NIST, the National Institute for Science and Technology in Gaithersburg, Maryland. We also participate in round-robin calibration events to British and Dutch national standards. Having our Calibration Laboratory accuracy tested against three different countries’ national standard laboratories gives independent verification to our customers of the most accurate temperature signal available for their process. All of our thermocouple wire is carefully calibrated, selected, and matched to meet or exceed ASTM, ANSI, or IEC initial calibration tolerance specifications. Calibration temperature capabilities include cryogenic -320F (-196C) and at any point in a range from a low temperature of -110F (-79C) thru an upper temperature of 2400F (1316C). TE Wire & Cable’s Calibration Laboratory is ISO9001-2000 certified and will earn ISO17025 in 2008. It conforms to MIL STD 45662A, ANSI/NCSL-Z540, AMS2750, ASTM E220, ISO/IEC Guide 25, ASTM E207 and others. Products can be supplied to meet BAC5621, ANSI MC 96.1 and other customer unique accuracy requirements.
Management
Gregory J. Smith - President
Mr. Smith has over 20 years of Operations and General Management experience in the Aerospace, Shipbuilding and Telecommunications industries. He has successfully led the growth of publicly-traded, international businesses focusing on customer service, product innovation and market development. He holds an MBA from Rensselaer Polytechnic Institute and a BSME from University of New Haven.
David Baskin –
Vice President, Finance
Mr. Baskin joined the company in 2011 as VP of Finance and Controller. He has held positions of increasing responsibility in Government, Automotive and Marine industries. Aside from Finance his experience include Operations, Marketing and Product Management. He holds a MBA from the University of New Haven and a Bachelor’s in Accounting from Quinnipiac University.
Patrick Durkin –
Vice President, Sales and Marketing
Mr. Durkin has been employed with the Company since 1984. He is responsible for the global sales efforts and for providing leadership for the growth of sales. Prior to Thermo Electric Co. Inc. he worked for Phelps Dodge Wire & Cable. At Phelps Dodge, he was a Regional Sales Manager. Mr. Durkin earned his Bachelor’s degree in Electrical Engineering from Villanova University in Pennsylvania.
Mathew Nadakal –
Technical Director
Mr. Nadakal joined the company in 2010 with nearly 20 years experience in aerospace and high temperature wire and cable experience at Thermax and Belden. He is responsible for engineering and new product development, quality system and calibration functions. His group is leading efforts to develop several innovative new products. Mr. Nadakal holds a Bachelor’s degree in Mechanical Engineering from University of Kerala (India) and MBA from Eller College of Management at University of Arizona.
Patrick Arnone –
Vice President, Manufacturing
Mr. Arnone has been employed with TE Wire & Cable LLC since 1977. His overall responsibilities include supervising all aspects of the wire manufacturing operation including inventory control, scheduling, production and labor. Mr. Arnone has been instrumental in implementing Lean Manufacturing Principles.